Seaboard Aspahlt Products Company
MATERIAL SAFETY DATA SHEET
 
SEABOARD ASPHALT PRODUCTS COMPANY
3601 FAIRFIELD ROAD
BALTIMORE, MARYLAND 21226
(410) 355-0330 OR FAX (410) 355-5864

CHEMTREC EMERGENCY
(SPILL, FIRE, EXPOSURE)
DAY OR NIGHT 800-424-9300


SECTION I. PRODUCT IDENTIFICATION
PRODUCT CODE:
PRODUCT NAME:
EL-1
Clippership White Elastomeric Roof Coating
 
SECTION II. INGREDIENT INFORMATION
 
 
 
 
Occupational Exposure Limits Vapor Pressure
 
% CAS OSHA PEL ACGIH TLV Others mm Hg @ Temp
1. Ethyl glycol < 5 107-21-1 NE NE 50 PPM .1 68F
2. 2,2,4 Trimethyl-
1,3 Pentandiol-
Monoisobutyrate


< 5


25265-77-4


NE


NE
 


1.0


180F
3. Diethylene glycol-
Mono Butyl Ether

< 5

112-34-5
 
 
 

.1

77F

No toxic chemicals subject to the reporting requirements of section 313 of title III of 40 CFR 372 are present.
 
SECTION III. HEALTH HAZARD INFORMATION

INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Anesthesia, respiratory tract irritation, dermatitis, headache, and nausea.

SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Irritation to eyes.

SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Irritation and dermatitis.

INGESTION HEALTH RISKS AND SYMPTOMS OF EXPSOURE: Gastrointestinal irritation, vomiting, and nausea.

HEALTH HAZARDS (ACUTE AND CHRONIC): Acute: None Chronic: NA

CARCINOGENICITY: NTP: No IARC MONOGRAPHS: No OSHA: No

MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: Anesthesia, respiratory tract irritation, dermatitis, and nausea.

EMERGENCY AND FIRST AID PROCEDURES: Remove to fresh air; wash affected area with water for fifteen minutes. For eyes or ingestion consult a physician if irritation persists.
 
SECTION IV. FIRE AND EXPLOSION DATA

FLASH POINT: NA
FLAMMABLE LIMITS IN AIR BY VOLUME: LOWER: 0.6% UPPER: 4.2%
EXTINGUISHING MEDIA: Foam, alcohol foam, CO2, dry chemical, water fog.
SPECIAL FIRE FIGHTING PROCEDURES: NA
UNUSUAL FIRE AND EXPLOSION HAZARDS: Material can splatter above 212 °F
 
SECTION V. REACTIVITY DATA

STABILITY: STABLE CONDITIONS TO AVOID: Temperatures over 350 °F
INCOMPATIBILITY (MATERIALS TO AVOID): NA
HAZARDOUS DECOMPOSITION OR BYPRODUCTS: None
HAZARDOUS POLYMERIZATION: Will not occur
 
SECTION VI. PHYSICAL DATA

BOILING POINT: 212 °F
VAPOR DENSITY: Heavier than air
COATING V.O.C.: 0.66 lb/gal (80 g/l)
SOLUBILITY IN WATER: Extremely
APPEARANCE AND ODOR: White medium viscosity liquid with faint odor
SPECIFIC GRAVITY (H20 = 1): 1.4
EVAPORATION RATE: Slower than ether
 
SECTION VII. SPILL, LEAK, AND DISPOSAL PROCEDURE

STEPS TO BE TAKEN IN CASE MATERIALS RELEASED OR SPILLED: Floor may be slippery, dike and contain liquid, transfer liquid to a container for disposal.
WASTE DISPOSAL METHOD: Absorb material with and inert absorbent, dispose in accordance with local, state and federal regulations.
 
SECTION VIII. SPECIAL PROTECTION INFORMATION

RESPIRATORY PROTECTION: None required if good ventilation is maintained
VENTILATION: Mechanical
PROTECTIVE GLOVES: Impervious
EYE PROTECTION: Chemical splash goggles
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: NA
WORK/HYGIENIC PRACTICES: NA
 
SECTION IX. SPECIAL PRECAUTIONS AND COMMENTS

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Keep from freezing - product may coagulate
OTHER PRECAUTIONS: NA
 
Date Prepared: 2/11/92
Revision: 0