Seaboard Asphalt Products Company

LN-23 (5 Gallon Pail) PRODUCT DATA ALUMINUM PAINT
LN-23 SEABOARD ALUMINUM ASPHALT PAINT

PRODUCT
DESCRIPTION:
Seaboard Aluminum Asphalt Paint meets ASTM-D-2824-85 Type I
specifications. This material is an asphalt cutback blended with
aluminum paste.
 
BASIC USES: Seaboard Aluminum Asphalt Paint is a non-fibred protective coating
offering a reflective aluminum surface for many applications.
 
LIMITATIONS: DO NOT HEAT container, DO NOT thin or exceed 900 rpm when
mixing or applying or use a roller for application. DO NOT apply over
soft asphalt or coal tar surfaces or areas that hold ponded water.
DO NOT back-brush or disturb product after leafing process has begun or surface may brown.
 
APPLICATION: Seaboard Aluminum Asphalt Paint must be applied to a surface that
is dry and clean from all foreign matter. This material should be
applied when the temperature is 50° F and rising. This material can be
applied by brush or spray equipment (recommended airless or piston
pump). The coverage rate should be 150-200 square feet per gallon.
 
STORAGE: Seaboard Aluminum Asphalt Paint can be used year round and the only
protection required would be from weathering of the container.
 
COMPOSITION: Asphalt
Mineral Spirits
Aluminum Paste
Desiccant
CAS 8052-42-4
CAS 64741-41-9
CAS 7429-90-5
CAS 63231-67-4

This information is to assist customers in determining if this product is suitable for the proposed application, and to satisfy themselves as to suitability of the contents. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from law or patent implied.

3601 FAIRFIELD ROAD
BALTIMORE, MARYLAND 21226
(410) 355-0330
(800) 536-0332
FACSIMILE (410) 355-5864


Email: sales@seaboardasphalt.com