|PRODUCT DATA||ALUMINUM COATING|
|LN-30 CLIPPERSHIP PREMIUM ALUMINUM FIBRE COATING|
|Clippership Aluminum Fibre Coating meets ASTM-D-2824-85 Type III|
specifications and is 100% ASBESTOS-FREE. This material is an
asphalt cutback blended with fibres and aluminum paste.
|BASIC USES:||Clippership Aluminum Fibre Coating is a protective coating used to|
produce an ultra-bright aluminum reflective for all types of surfaces.
|LIMITATIONS:||DO NOT HEAT container. DO NOT thin or exceed 900 rpm when|
mixing or applying or use a roller for application. DO NOT apply over
soft asphalt or coal tar surfaces or areas that hold ponded water.
DO NOT back-brush or disturb product after leafing process has
begun orsurface may brown.
|APPLICATION:||Clippership Aluminum Fibre Coating must be applied to a surface that|
is dry and clean from all foreign matter. This material should be
applied when the temperature is 50° F and rising. This material can be
applied by brush or spray equipment (recommend airless or piston
pump). The coverage rate should be 50-75 square feet per gallon.
|STORAGE:||Clippership Aluminum Fibre Coating can be used year round and the|
only protection would be from weathering on the container.
This information is to assist customers in determining if this product is suitable for the proposed application, and to satisfy themselves as to suitability of the contents. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from law or patent implied.
3601 FAIRFIELD ROAD
BALTIMORE, MARYLAND 21226
FACSIMILE (410) 355-5864