Seaboard Asphalt Products Company

Clippership Logo PRODUCT DATA LAP CEMENT
LN-3 CLIPPERSHIP LAP CEMENT

PRODUCT
DESCRIPTION:
Clippership Lap Cement meets ASTM-D-3019-85 Type I
specifications. This material is a blend of asphalt and refined
mineral spirits with inherent adhesion and water-proofing qualities.
 
BASIC USES: Clippership Lap Cement is a cold process adhesive for asphalt
impregnated roofing felts and mineral surface roll roofing.
 
LIMITATIONS: DO NOT HEAT container. NOT RECOMMENDED for use with
fifteen pound felt or glass fiber not coated with asphalt.
 
APPLICATION: Clippership Lap Cement should be applied to a dry and clean
surface free from loose gravel, dirt, dust, oil, rust scale, and loose
paint. Apply when air temperature is above fifty degrees. During
application all edges are to be embedded in the lap cement, but do
not apply too thick; an excess amount will squeeze out between
laps and could cause surface bulging between plies.
 
STORAGE: Clippership Lap Cement can be used year round and the only
protection would be from weathering on the container.
 
COMPOSITION: Asphalt
Mineral Spirits
CAS 8052-42-4
CAS 64741-41-9

This information is to assist customers in determining if this product is suitable for the proposed application, and to satisfy themselves as to suitability of the contents. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from law or patent implied.

3601 FAIRFIELD ROAD
BALTIMORE, MARYLAND 21226
(410) 355-0330
(800) 536-0332
FACSIMILE (410) 355-5864


Email: sales@seaboardasphalt.com