|PRODUCT DATA||DRIVEWAY SEALER|
|TE-2 CLIPPERSHIP COAL TAR TOPCOAT AND SEALER|
|Clippership Coal Tar Topcoat and Sealer is formulated from base|
coal tar emulsion meeting Federal Specification RP-355e specifications.
This material is a coal tar emulsion with polymers and fine aggregate.
|BASIC USES:||Clippership Coal Tar Topcoat and Sealer is used as a protective|
coating on bituminous surfaces from petroleums and elements of
the weather and traffic wear.
|LIMITATIONS:||DO NOT ALLOW material to freeze. DO NOT USE on concrete.|
DO NOT USE on bituminous surfaces less than four months old.
|APPLICATION:||Clippership Coal Tar Topcoat and Sealer must be applied to a surface|
that is free of all foreign matter and residues. This material
must remain under dry conditions until it is cured. This material can be
applied by brush, squeegee, or spray equipment and should yield a
coverage rate of 40-60 square feet per gallon. This material should be
applied on a surface that is slightly damp for best results.
|STORAGE:||Clippership Coal Tar Topcoat and Sealer must be kept from freezing.|
|COMPOSITION:||Refined Coal Tar
This information is to assist customers in determining if this product is suitable for the proposed application, and to satisfy themselves as to suitability of the contents. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from law or patent implied.
3601 FAIRFIELD ROAD
BALTIMORE, MARYLAND 21226
FACSIMILE (410) 355-5864