Seaboard Asphalt Products Company

TE-36 (5 Gallon Pail) PRODUCT DATA DRIVEWAY SEALER
TE-36 EZEE KOTE TAR EMULSION DRIVEWAY SEALER

PRODUCT
DESCRIPTION:
Ezee Kote Tar Emulsion Driveway Sealer is formulated from base
coal tar emulsion meeting Federal Specification RP-355e specification.
This material is a coal tar emulsion.
 
BASIC USES: Ezee Kote Tar Emulsion Driveway Sealer is used as a protective
coating on bituminous surfaces from petroleums and elements of
the weather and traffic wear.
 
LIMITATIONS: DO NOT ALLOW material to freeze. DO NOT USE on concrete.
DO NOT USE on bituminous surfaces less than four months old.
 
APPLICATION: Ezee Kote Tar Emulsion Driveway Sealer must be applied to a
surface that is free from all foreign matter and residues. This material
must remain under dry conditions until it is cured. This material can be
applied by brush, squeegee, or spray equipment and should yield a
coverage rate of 100-125 square feet per gallon. This material should
be applied on a surface that is slightly damp for best results.
 
STORAGE: Ezee Kote Tar Emulsion Driveway Sealer must be kept from freezing.
 
COMPOSITION: Refined Coal Tar
Clay
Quartz
Water
CAS 65996-90-9
CAS 1332-58-7
CAS 14808-60-7
CAS 7732-18-5

This information is to assist customers in determining if this product is suitable for the proposed application, and to satisfy themselves as to suitability of the contents. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from law or patent implied.

3601 FAIRFIELD ROAD
BALTIMORE, MARYLAND 21226
(410) 355-0330
(800) 536-0332
FACSIMILE (410) 355-5864


Email: sales@seaboardasphalt.com